|
United States of
America
Department of Transportation ----Federal
Aviation Administration
Supplemental Type Certificate
| This certificate, issued to |
NASCO Aircraft
Brake Inc.
13300 Estrella Avenue
Gardena, California 90248 |
certifies that
the change in the type design for the following product with the limitations and
conditions therefor as specified hereon meets the airworthiness requirements of
Part 4b* of the Civil Air Regulations. *Certification basis is set
forth in Type Certificate Data Sheet (TCDS) A3WE.
| Original Product - Type Certificate Number:
|
A3WE |
| Make: |
Boeing |
| Model: |
727-100 and 727-200 Series
|
Description of Type Design
Change: Installation of NASCO
rotor part number 717101-85,-133, -134, and -135 in BFGoodrich Brake Assemblies
part number 2-1147, 2-1147-1, -3, or -4 in accordance with NASCO Configuration
Control Document NCC003, revision New, dated August 19, 1998, or later FAA approved
revision.
Limitations and
Conditions: This
installation should not be incorporated in any aircraft unless it is determined
that the interrelationship between this installation and any previously approved
configuration will not introduce any adverse effect upon the airworthiness of
the aircraft. The approval of this change in type design applies only to
Boeing 727-100 and -200 series airplanes equipped with BFGoodrich brake assemblies
2-1147, 2-1147-1, 2-1147-3, or 2-1147-4. If the holder agrees to permit
another person to use this certificate to alter the product, the holder shall
give the other person written evidence of that permission.
This certification and
the supporting data which is the basis for approval shall remain in effect until
surrendered, suspended, revoked, or a termination date is otherwise established
by the Administrator of the Federal Aviation Administration.
| Date of
application: |
January 27,
1993 |
Date issued: |
|
| Date of
issuance: |
September 04,
1998 |
Date amended:
|
|
|
